Windows updates fails on KB5034441: Windows Recovery Environment update for Windows 10, version 21H2 and 22H2: January 9, 2024

Open PowerShell with Administrator rights and first allow to run a PowerShell script:

set-executionpolicy remotesigned

Script:

Add an update to Windows RE | Microsoft Learn

09.21.2022

Get both apps from the Microsoft Store:

QuickLook

Microsoft PowerToys preview releases at GitHub

Open Broadcaster

03.10.2022

How to add an adition NTP server to Windows 10, open COMMAND:

reg add “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters” /v NtpServer /t REG_SZ /d “pool.ntp.org,0x1 time1.google.com,0x1 time.windows.com,0x9” /f

Restart the service:

sc config W32Time start=auto


Verify the configuration:

w32tm /query /configuration


Thanks to: techexpert.tips

03.01.2022

Use Windows 10 as NTP Server.

Open the command prompt (cmd) as administrator and fire the following commands:

  1. Enable the NTP server service

net stop W32Time
reg add “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Config” /v LocalClockDispersion /t REG_DWORD /d 0 /f
reg add “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters” /v LocalNTP /t REG_DWORD /d 1 /f
reg add “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpServer” /v Enabled /t REG_DWORD /d 1 /f
reg add “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\Config” /v AnnounceFlags /t REG_DWORD /d 5 /f
sc config W32Time start=auto
net start W32Time

2. Check if the NTP server is enabled

w32tm /query /configuration

See in the output the 2nd last line, Enabled: 1 (local) is correct.

NtpServer (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)


3. Allow rule in the firewall

netsh advfirewall firewall add rule name=”NTP Server” dir=in protocol=udp localport=123 profile=any enable=yes action=allow


4. Test the service from external system

w32tm /stripchart /computer:192.168.0.10 /samples:4 /dataonly

03.01.2022

To enable PING reply in Windows 10 the firewall needs to allow the ping request.

Open the command prompt (cmd) with administrator rights and fire the following command.

netsh advFirewall Firewall add rule name=”PING IPv4 allow” protocol=icmpv4:8,any dir=in action=allow